sumitomo减速机,弗兰德减速机,重齿,南高齿-AJ亚洲国际传动设备(上海)有限公司 设为首页 - 加入收藏 - 技术博客 - 网站地图
   齿轮马达
RR系列同轴式斜齿减速机
RS系列斜齿轮-蜗轮减速机
RK系列斜齿-螺旋锥齿轮减速机
RF系列平行轴斜齿减速机
   行星减速机
RP系列行星减速机
   重载齿轮箱
RHB工业齿轮箱
RM系列大型工业减速器
   高速齿轮箱/增速箱
R高速齿轮箱/增速箱
   风电齿轮箱
R风电齿轮箱
   三相异步电动机
R三相异步电动机
您当前位置: 首页 > 新闻资讯
SEW减速机工作中所需要了解的技巧以及注意事项

零部件产品的生产加工需要使用机械来完成,因此机械设备的工作效率直接决定着产量,为了达到提高生产量的目的,很多企业都会注重SEW减速电机的使用。SEW减速机具有很多的功能优势,同时可以在工作的过程中提供稳定的工作效率,所以减速电机的应用为生产和生活都带来了很多的便利条件。为了在拆卸减速电机的时候更加的快捷,需要了解相关工作技巧。

Production and processing parts of the products need to use machinery to complete, so the mechanical equipment work directly determines the efficiency of production, in order to improve the production, many companies will focus on SEW gear motor. SEW reduction motor has many advantages, and can provide a stable working efficiency in the process of work, so the application of the reduction motor for the production and life has brought a lot of convenience. In order to be more efficient in removing the deceleration motor, need to understand the relevant work skills.

在拆卸SEW减速机的时候,首先应该将SEW减速电机的外部接线拆下来,同时工作人员要做好标记,之后将底脚的螺钉松开,将电机与传动机械分开来。在拆卸SEW减速电机轴上的带轮以及联轴器的时候,需要加一些煤油在带轮的电机轴之间,这样可以让渗透润滑的效果更好,在拆卸的时候更加的便捷。

In the disassembly of SEW gear motor, should first motor SEW external wiring is removed, and the staff to mark, then screw loose footing, the electrical and mechanical transmission. When removing the belt wheel and the shaft coupling of the SEW reduction motor shaft, the need to add some kerosene in the motor shaft with a wheel, so that the effect of infiltration lubrication is better, more convenient in the demolition of the time.

而装有滚动轴承的减速电机在拆卸的时候,首先要将轴承的外盖拆卸下来,然后在将开端盖的固紧螺丝松开,工作人员需要注意在端盖和机座外壳的接缝处做好标记,并且将卸下来的紧固端盖的螺钉拧到电机盖上的螺孔中,之后将顶盖顶出。

A motor when the demolition of the rolling bearing, the bearing cover must be removed, and then the locking screw loose end cap, the staff need to pay attention to mark on the joint end cover and a base casing, screws and fastening the unloaded end cover to cover screw motor on the roof top, then.

在拆卸带有电刷的SEW减速机的时候,首先将电刷从刷取中取出,之后对去直流电机,同时要将电刷中的性线的位置做好标记。在转出轴子的时候,需要注意不要碰伤定子线圈,还要注意转子的重量不能够太大,可以用手抽出。如果重量太大的话,应该用起重设备来吊出。

When removing the SEW reduction motor with an electric brush, the brush is first taken out from the brush, and then to the DC motor, the position of the line in the brush is marked. When out of the Axion, do not need to pay attention to bumps stator coil, but also pay attention to the weight of the rotor can not be too large, you can hand out. If the weight is too large, it should be lifted out of the lifting equipment.

以上是在拆卸SEW减速机工作中所需要了解的技巧以及注意事项,为了让减速电机的拆卸工作更加顺利的完成,最好是由专业的工作人员来进行这项工作,在工作过程中除了要注意工作规范之外,还需要注意符合安全工作要求。

The above is to understand the need to work in deceleration motor skills in removing SEW and matters needing attention, in order to make the demolition work more smoothly completed gear motor, preferably by a professional staff to carry out this work, in the work process in addition to pay attention to work for, also need to pay attention to meet the safety requirements.


日期:2016/12/12 14:02:10
咨询QQ
点击这里给我发消息